- Custom Built to suit your requirements
- Sea-Can is an enclosed container measuring 8’ high x 8’ wide x 20’ or 40’ long
- Skidmounted package design
- Fuel can be natural gas, no 2 fuel oil, propane, electric or wood pellet
- Steam 15 psi up to 300 psi
- Hot Water 30 psi up to 100 psi
- Electric up to 75 horse power
- Low water content boilers
- HBW Sea-Can Boiler Room™ – Model RC (Re-conditioned container)
- HBW Sea-Can Boiler Room™ – Model NC (New container)
- HBW Sea-Can Boiler Room™ – Model MU (Multiple Containers)
- HBW Sea-Can Boiler Room™ – Model CB (Custom Built)
- HBW Skidmounted Boiler™ – Model SM (Boiler and all components mounted on a common base, piped and wired)
LOWER COST – At any time boiler and/or equipment can be easily upgraded, eliminating the need to make building and/or boiler room alterations, saving time and resources. Downtime for production and/or heating is reduced. The “Sea-Can Boiler Room™ ” can bring the steam closer to your process equipment.
FULLY PORTABLE – Each unit is pre-plumbed and pre-wired including lighting and service receptacles for permanent or temporary installations for heating or process plants. The entire unit can be moved to a new location throughout its lifetime.
READY-TO-GO – Easily transported by tilt ‘n’ load truck or by crane and trailer.
QUALITY – Each unit is fully shop tested and inspected for optimum operating efficiency. Units are inspected and certified by the TSSA and ESA.
CONVENIENT – Frees up space in your present plant for other uses.
COMPACT – The entire boiler plant, water treatment equipment and system controls are mounted inside “Sea-Can Boiler Room™ “.
DESIGN – Boiler and equipment are placed in the “Sea-Can Boiler Room™“ allowing easy access for maintaining and servicing.
INCREASED SAFETY – Each unit includes 36” man door (or doors) with panic bar for easy entry and exit. Ventilation and fresh air makeup is provided through a louvered vent. Manual or Automatic fire extinguishers can be installed into the unit. Checker plate floor used for increased traction.
SECURE – Boiler rooms can be locked allowing only authorized Personnel. Security systems can be tied into the panel.
INCLEMENT WEATHER PROTECTION – All boiler rooms contain a second source of heating using an oil furnace or a gas fired unit heater controlled by a separate thermostat. No additional structures are required for protecting boiler room.
EASY INSTALLATION – For permanent installations entire unit can be set on a reinforced concrete slab. Service connections are all NPT up to 2” and flanged over 2”. All connections terminate on the outside wall or roof of the boiler room. Connections to be considered are water supply, condensate return, fuel, blowdown line, steam supply and electrical to a pre-wired disconnect inside boiler room.
PERSONNEL CONVENIENCE – These units provide space for maintaining log books, water chemistry testing, etc., and are designed for the comfort of boiler operators.
AESTHETICALLY PLEASING – The exterior can be painted a colour of your choice to be visibly appealing. Interior walls of “Sea-Can Boiler Room “ are painted with a high gloss white paint and checker plate floors are painted black.
CUSTOMER SERVICE – Qualified staff available to answer any of your questions at 1-888-211-1402. Our service technicians have several years experience with the “Sea-Can Boiler Room “. We offer 24/7 hours service and our fleet of vehicles and parts department are fully stocked.
FINANCING AVAILABLE – Up to 60 months
“SPECIAL RENTAL RATES”
Hamilton Boiler Works Portable Rental Boilers available while your unit is being built.
INDUSTRIES WITH SEA-CAN BOILER ROOMS OR SKIDMOUNT DESIGN
Heating, Bakeries, Concrete,
Greenhouse, Oil Recycling,
Construction, Special Effects,
Steel Company, Power Generation,
Sewer Liner Curing, Chemical Distribution,
Conveyor Belt & Rubber Products